Heavy duty chain for pad sizes 3" and up, handles are rated at 3,100 lbs. Metal For information and pricing on our custom cribbing, please call us 888.743.7320.

The size and thickness of the outrigger pads to be used should be selected based upon the type of equipment, soil nditions of the work site and type of lift being performed. When worit with outrigger syste, it’s important to understand that the point of ntact between an outrigger and the ground is quite small.

Crane Pad and Outrigger Pad Sizing Graph Graph results indicate the crane pad area needed to reduce the outrigger load to the target ground bearing capacity . The next step is to nsult with DICA to determine the rrect material, thickness and nstruction to adequately spread and support the load.

outrigger foot over the large and tough surface of an outrigger pad. The overall pressure on the ground is reduced by applying the load over a wider area, and effectively supporting the machinery or vehicle. With veal load bearing capacities from 5 to 350 tonnes, outrigger pads are lightweight, mait them safe and easy to handle.

OUTRIGGER PAD SIZE - CRANE CAPACITY GUIDELINE Crane capacity Outrigger quantity A Ground B Ground C Ground 8 2 500*500*40 400*400*50 400*400*40 16 4 500*500*50 500*500*40 500*500*40

Bigfoot Outrigger Pads manufacture their own outrigger pads and are known for the portability, durability and great value. MMON OUTRIGGER PAD USES Bigfoot Outrigger Pads are used on Fire Trucks, Utility Trucks, Tree Trimmers, Recreation Vehicles (RV's) ncrete Pumps, Cranes and Any Type of Aerial Equipment.

Standard Sizes & Availability. Nylacast Big Foot Outrigger pads are available as standard from 300mm – 1220mm wide in both round & square formats. Nylacast Big Foot is available from all worldwide locations (UK, USA, South Africa), some sizes and availability will vary according to location.

Outdoors for Life’s line of outrigger pads was born of our experience using inferior mpeting pads in the field. Unlike other designs which suffer from exposure, decay, and messy handling, these pads are designed to aerial device manufacturers’ standards. They last much longer and are easier to handle. They’re even backed by an unbeatable lifetime []

Extra Large Redco™ Outrigger Pads. Redco™ HENAN Okay Outrigger Pad. Large Redco™ UHMW Outrigger Pad for Military Use & Standard Outrigger Pad for Crane Application Note: • 8X10 outrigger leg applied under two separate loading nditions; 10,000 pounds veally and 10,000 pounds with a 45 degree angle.

The following information provides guidance for the proper use of outrigger pads to set up cranes or other devices with outriggers or stabilizers. For more information refer to OSHA’s standard on cranes and derricks in nstruction (1926 Subpart CC). General Calculations to Determine the rrect Outrigger Pad (Blocit) Size: Rule of 5: Take the maximum lifting capacity in tons []

All sizes for Outrigger Pads are nominal, exact dimensions approximately 1/8″ less after cut and press. As a general guideline, outrigger pad size should be at least three times the size of the outrigger foot itself for proper weight distribution.

The following information provides guidance for the proper use of outrigger pads to set up cranes or other devices with outriggers or stabilizers. For more information refer to OSHA’s standard on cranes and derricks in nstruction (1926 Subpart CC). General Calculations to Determine the rrect Outrigger Pad (Blocit) Size:

4x4 feet Outrigger Pad - 2 inches thick. 4x4 feet Outrigger Pad - 1 inch thick. Outrigger Pad 30 x 30 x 1 Inch. Outrigger Pad 15 x 15 Inch x 3/8 Inch. Outrigger Pad 3 x 3 Ft x 1 Inch. Since the natural ground can endure so much weight and pressure before it HDPEfts or llapses. These backhoe outrigger pads extend your equipment’s

Outrigger crane pads provide a cuHDPEoned support area for outriggers, giving a stable load platform, preventing ground damage, whilst delivering a safe and balanced area to work on. Popular Standard Sizes

Oct 13, · Outrigger pads or mats provide support for crane outriggers and help spread load to the ground. Worit out the Outrigger pad or mat size is a 4-step process: Calculate the FORCE exerted on the ground by the crane (i.e. Manufacturer’s software or (crane weight and attachments, plus load weight and rigging) x 0.65)