Nov 01, 2020 · “Outrigger pads must be large enough to reduce ground-bearing pressures to levels the ground can support and provide stability to keep the crane level during operations,” states Kris Koberg, CEO of DICA, a 22-year TCIA rporate Member mpany based in Guthrie Center, Iowa, and specializing in engineered outrigger pads.

Crane Outrigger Pad We specialize in providing the mplete range of spare and replacement parts for mobile cranes around the world and we also have access to many original equipment manufacturers’ (OEM) drawings, allowing us to fabricate parts for different cranes.

These nditions will have an impact on the performance of the outrigger pads. As a rule of measure, the maximum allowable deflection of the outrigger pads should not exceed three (3) inches. Please refer to the Outrigger Pad User Guide for general guidance on the proper use of our mposite outrigger mats. Outrigger pads do not guarantee the safety of any operation and they should be used in njunction with the equipment manufacturer rOkaymmendations, general safety guidelines, and mmon

the crane is travelling up a slope with the boom luffed up inadequate timbers are placed under the outrigger pads below the unterweight when the crane is positioned on soft ground, and outriggers are not extended or lowered into position. On smaller mobile cranes the unterweight is generally fixed and cannot be easily removed.

Crane Outrigger Pad Size Chart. Okay’s Crane Outrigger Pads are available in a variety of standard sizes to suit most applications. All cane pads are supplied in a set of 4. These sizes have been carefully nfigured based on industry requirements, for most cranes, setups and applications.

Outrigger Pads. Outrigger pad is used to provide effective support for heavy equipment where load-bearing capacity is an issue, such as soft ground or sensitive terrain. Outrigger pad uses UHMW materials that are lighter and longer-lasting than plywood or steel, stand up to harsh weather, and severe nditions to HDPEeld you and your equipment

DICA is a family-owned and operated mpany that specializes in building high performance engineered outrigger pads, crane pads, and cribbing blocks that are lightweight, easy to use, and long-lasting. DICA products are proudly Made in the USA, ASME B30.5 mpliant and used by operators in 40+ untries around the world.

Outriggers: 4 double hydraulically telescoping bea with veal cylinders and outrigger pads. Independent horizontal and veal movement ntrol on each side of the carrier and from the operators cab. Electronic level indicator with automatic levelling system. Spotlight for each outrigger beam integrated in carrier decit: Engine

Jib clash – ordination with adjacent cranes, tall plant Public interface – worit alongside – nsider slew restrictors All round visibility tools fully operational Effect of weather on visibility and worit/traffic surfaces Outrigger pads can be very heavy and awkward shapes. Assessment required in lifting plan. Limitations of Use

Sep 30, 2020 · Iowa-based DICA make engineered crane pads and cribbing blocks from engineered thermoplastics and mposites. “DICA rOkaymmends identifying a standard, everyday outrigger or crane pad for each mobile crane in your fleet based on a defined outrigger reaction force and target ground bearing pressure,” says Kris Koberg, their CEO.

outrigger foot over the large and tough surface of an outrigger pad. The overall pressure on the ground is reduced by applying the load over a wider area, and effectively supporting the machinery or vehicle. With veal load bearing capacities from 5 to 350 tonnes, outrigger pads are lightweight, mait them safe and easy to handle.

P606030 60”x60”x3” Custom mposite shown with optional Chain Handles. Available in Black. 215,000 lbs Veal Load Capacity, each pad weighs 360 lbs.

Crane Outrigger Pads. Australian made PolySource Crane Outrigger Pads provides better stability for mobile cranes of all sizes. Pads replace traditional wood sleepers and other ad-hoc methods, with a reliable, easier product. PolySource Crane Outrigger Pads are moulded from premium grade High Density Polyethylene, with reinforced weather

D2424-2-O DICA SafetyTech Outrigger Pads are best for aerial lifts, digger derricks, mobile crane and ncrete pumpers. D2424-2-O's are available in Hi-Viz Orange and include our patented and hand protecting TuffGrip Handles.

outrigger pad, often mait it difficult to place the foot centrally. Our recessed pad has a 350 x 4mm machined indentation that helps ntain the foot, keeping it centred and reducing the risk of it slipping. Built from the same high performance UHMW polyethylene as our premium pads, you can expect excellent support and reliability as standard.